+ PRODUCT DESCRIPTION:

OS series Light sensor

Description

OS series is the retro-reflective photoelectric sensor for passage detection of a detection target in the automatic stamping. It outputs signal when a detection target pass between sensor unit and reflector. Install it to exit-side of die, chute or belt conveyer. The device is connected to our malfunction detector PS-682, PS-662, PS-661, PS-104, PS-101 and all.

From May 21, 2023, the production of "Side type" for panel direction and "PNP output" for sensor output type has been end of life.

Features

• Compact design
  • Downsizing maximum 50% compare to our conventional product.
• Sensitivity improvement
  • Decrease an influence of ambient light by employing modulated radiation system. And maintain stable sensitivity for long-term use because of automatic adjusting function.
  • Moreover, it can detect smaller detection target because of package density of light emitting and receiving elements is 1.3 times as many as our conventional product.
• Presence/Absence detection
  • Presence/Absence detection which our conventional product did not have is added. Therefore, it can detect a detection target left over within an effective area of detection.
• Digital display
  • Adjusting sensitivity changed from existing dial system to digital display. Easy to control and cut down both setting mistake and adjusting man-hours.
• * Power supply voltage DC12-24V
• * Remote operation
  • It is possible to change sensitivity and operate function settings from our malfunction detector. (Only the device compatible with remote operation)
• * Various settings with digital display
  • et up ON/OFF for Presence/Absence detection, polarity of signal output and others.
• * 2 types of installation
  • You can choose All-in-one-type and Separation-type. All-in-one-type is that sensor unit and reflector are in same bracket plate. Separation-type is that install sensor unit and reflector separately.
• * signal output type is NPN output.
• * Maximum 1m of detecting distance. (Only separation-type)

Front type can be installed neatly even in a narrow place because the direction of cable connection is the same as the optical axis.

OS series variation

Dimensions

Sensor unit

Sensor unit  

(End of Life) Sensor unit (side type)  

Reflector

Reflector 

All-in-one-type

All-in-one-type 

Separation-type

Separation-type 

All-in-one-type with magnet stand

All-in-one-type with magnet stand 

Separation-type with magnet stand

Separation-type with magnet stand 

2 types of installation

All-in-one-type

Separation-type

The product is packed in all-in-one type shape.
When use separation type, please change assembling referring the picture.

Specification